Roche Diagnostics
Operator’s Manual · Version 3.4 F-25
Cedex Bio analyzer 14 ISE operation
Daily operation
Completing the preparation tasks
1
When you have finished performing maintenance actions, press to
proceed to the next stage in the Prepare wizard.
A screen is displayed that shows the status of the reagents on the reagent disk.
This is not relevant for ISE operation.
2
Press .
A screen is displayed that shows the status of the cuvettes that are on board. This
is not relevant for ISE operation.
3
Press .
A screen is displayed that shows the tests that need calibrating. Because the
calibrations have already been performed as part of the Daily Prepare Actions
maintenance action, this step is not relevant for ISE operation.
4
Press .
The Overview tab is displayed. The preparation tasks are completed.
Performing calibrations
The ISE calibrations are integrated in the Daily Prepare Actions maintenance action.
e
See Daily prepare actions on page F-48.
Defining orders
ISE sample analysis is integrated in the operation of the main analyzer. The process of
defining orders is the same.
a To define orders
1
Follow the instructions given in Defining orders on page B-41.
To Next Page
Loading...
Need help?
General
