Roche Diagnostics
Operator’s Manual · Version 3.4 A-11
Cedex Bio analyzer 1Safety
Disposal recommendation
Disposal recommendation
Disposal label
Disposal of external components
Disposal of the analyzer
Constraint
It is left to the responsible laboratory organization to determine whether control unit
components are contaminated or not. If contaminated, treat in the same way as the
analyzer.
Legal liability
It is the users’ sole responsibility to determine whether they activate the TRL Check
feature, and if they do so to define the lower measuring range in accordance with the
country specific requirements. If the users activate the TRL Check feature, they are
also responsible for validation of the ranges they define.
Electrical and electronic equipment marked with this symbol are covered by the European
directive on waste electrical and electronic equipment (WEEE).
The symbol denotes that the equipment must not be disposed of in the municipal waste
system.
External components such as the scanner and the ISE power supply, which are marked
with the crossed-out wheeled bin symbol, are covered by the European Directive (WEEE).
These items must be disposed of via designated collection facilities appointed by govern-
ment or local authorities.
For more information about disposal of your old products, contact your city office, waste
disposal service or your local service representative.
The analyzer must be treated as biologically contaminated hazardous waste. Final disposal
must be organized in a way that does not endanger waste handlers. As a rule, such equip-
ment must be sterile before it is passed on for final disposal.
For more information contact your local service representative.
To Next Page
Loading...
Need help?
General
