Roche Diagnostics
B-104
Operator’s Manual · Version 3.4
6 Special operations Cedex Bio analyzer
Deleting QC results
Setting up your calibration schedule
The Cedex Bio analyzer provides convenient software-supported procedures for the
following major calibration scenarios:
o Performing all calibrations that are currently due
o Performing all calibrations that fall due within a configurable forecast period
o Performing individual calibrations
Performing calibration as part of the Prepare wizard includes performing all
calibrations that are due and that will fall due during the forecast period.
The following table lists the configurable definitions and describes their effect.
Deleting QC results
Accepted QC results are normally deleted from the QC Status list as part of the daily
end of shift activities, at the same time, results that were generated before the first day
of the previous month are deleted from the QC History list.
This section describes how to proceed if you need to delete QC results outside the
normal daily routine.
e
For deleting QC results at the end of a shift, see Cleaning up the database on page B-92.
Definition item Configuration path Effect
Forecast Hours Utilities >
Configuration >
Calibration
Period of time, starting with the current
date, within which calibration falls due.
Defining a forecast period (value other than
zero) allows to concentrate calibration per-
formance to specific days.
Cal Auto Accept Utilities >
Configuration > Result
Handling
If on, results that are not flagged are auto-
matically accepted.
Results with flags that are marked in a pre-
defined list of acceptable flags would also be
automatically accepted.
Cal Acceptable
Flags
Utilities >
Configuration > Result
Handling
List of calibration relevant flags. Flags that
are marked are automatically accepted if
Cal Auto Accept is on.
Table B-10 Calibration definitions and their effect
o QC results are displayed in the QC Status list as soon as they are generated. A copy of
the results is also placed in the QC History list. This list keeps the results of the previ-
ous and the current months.
o Deleting QC results, deletes the associated orders as well.
To Next Page
Loading...
Need help?
General
