48 Using the Content Workspace
– From the tool bar, click , then select Send to Connected
Handhelds
.
– Click , then select
Send to Connected Handhelds.
The Transfer Tool opens.
3. Select the file, then click
Start Transfer.
The Status window opens and the Stop Transfer button is enabled.
The selected files and folders are transferred to the selected
handhelds.
4. When the transfer is complete, close the Transfer Tool.
Working with connected handhelds
You can use the Content workspace to perform a number of tasks. To use
the features described in this section, your handhelds must be turned on
and connected by one of these means:
• The TI-Nspire™ Docking Station or TI-Nspire™ CX Docking Station
• TI-Nspire™ Navigator™ Cradle
• TI-Nspire™ CX Wireless Network Adapter
• A direct connection through a standard USB cable
Note: The tasks in this section can only be performed by TI-Nspire™
handhelds. TI-84 handhelds are not supported in these tasks.
To Next Page
Loading...
Need help?
General
