DISPLAY F EATURES
VF8 DELTA/DELTA XL/KAPPA 21-11
Display Parameters (Main Screen)
Certain respiratory mechanics parameters are available for continuous display in
parameter boxes. Others can be displayed only on a special Respiratory Mechanics
screen.
Parameter boxes show the parameter label, its current numerical value, and its alarm
limits (if available and set for that parameter). You can display up to three parameters
at a time. To display a parameter box, you must change its display priority in the
Parameter Priority option. See page 2-5 for more information on prioritizing and
displaying parameter boxes.
To select the parameters you wish to display in the main screen parameter box, open
the appropriate setup menu as follows:
Click on the parameter box labeled Paw (airway pressure) or Vent (Flow/
Vo l u m e ) ,
or
1. Press the Menu fixed key on the front of the monitor.
2. Click on Patient Setup.
3. Click on Parameters. A list of available parameters appears.
4. Click on Paw
or Vent.
To set up respiratory mechanics parameter values
1. Open the Paw or Vent menu as described above.
2. Click on More at the bottom of the menu to get to the second page.
3. Click on Parameter 1 to display available choices.
4. Scroll through parameters listed in the right column.
5. Click on a desired parameter, or click on None to leave this space in the
parameter box empty.
6. Repeat steps 3 through 5 for Parameter 2 and Parameter 3.
To Next Page
Loading...
Need help?
General
