Dräger Infinity Kappa User Manual

23-2 DELTA/DELTA XL/KAPPA VF8
23 S
CIO® FOUR MODULES
Overview
The Scio Four modules sample breathing gases from adults and pediatrics. The gas
modules continuously measure the content of CO
2
, N
2
O, O
2
, and one of the anesthetic
agents, Halothane, Isoflurane, Enflurane, Sevoflurane, and Desflurane in any mixture
and communicates real time and derived gas information to the Infinity monitors.
With etCO
2
the monitors can measure end tidal carbon dioxide, inspired carbon
dioxide, and respiration rate in either mainstream or side-stream measurement mode;
and with etCO
2
+Respratory Mechanics, spirometry and carbon dioxide can be
monitored. The monitors can interface with specific third-party devices via an MIB
protocol converter.
A
Scio module is a free-standing unit that samples breathing gases from adult and
pediatric patients in non-, partial- and total rebreathing systems.
NOTE: The Dräger MultiGas and MultiGas+ modules are not supported by the
Infinity Delta Series VF6, software and higher.
NOTE:
 The Scio module comes in four different models, with four different levels of
performance. Please note which model you are using.
 All references to “the Scio module” in this chapter refer to all four models of
the Scio module: Scio Four Oxi plus, Scio Four Oxi, Scio Four plus, and Scio
Four. Model-specific information is documented as required.
 If your Scio module is labeled simply “Scio” in the upper right of the front
panel, then the functionality of your module will match the “Scio Four Oxi
plus”.
=

Dräger Infinity Kappa Specifications

General

Brand	Dräger
Model	Infinity Kappa
Category	Medical Equipment
Language	English