SVO2/CCO MONITORS
VF8 DELTA/DELTA XL/KAPPA 28-17
SvO2/CCO Monitors
An SvO2/CCO monitor measures cardiac output and related hemodynamic
parameters. This Dräger monitor accepts data via an MIB interface from an Abbott Q2
(Q2+) SvO2/CCO monitor or from the Edwards/Baxter Vigilance and Vigilance II
SvO2/CCO monitors.
The following table lists the parameters available for display.
NOTE: The bedside monitor calculates the Body Surface Area (BSA) using the
patient height and weight that was entered in the “Admit Patient” menu (see page 4-2). It
uses this BSA value to calculate the Index parameters (for example, ICI, CCI, SVRI etc)
for the Baxter MIB device. Although the Baxter device can calculate BSA internally and
send ICI and CCI values to the monitor, the monitor will still calculate the index values
based on its BSA.
Label Parameters Units SvO2/CCO Monitor from
BT* Blood Temperature °C Q2, Vigilance and
Vigilance II
CCO Continuous Cardiac
Output
L/min. Q2, Vigilance and
Vigilance II
CCI CCO Index L/min./m
2
Vigilance and Vigilance II
ICO ntermittent Cardiac
Output
L/min. Q2, Vigilance and
Vigilance II
ICI ICO Index L/min./m
2
Vigilance and Vigilance II
SaO2* Arterial Oxygen
Saturation
% Vigilance and Vigilance II
SvO2 Venous Oxygen
Saturation
% Q2, Vigilance and
Vigilance II
SVR Systemic Vascular
Resistance
dynes x sec x cm
-5
Vigilance and Vigilance II
SVRI SVR Index dynes x sec x cm
-5
x m
2
Vigilance and Vigilance II
VO2 O
2
Consumption mL/min Vigilance and Vigilance II
DO2 O
2
Delivery mL/min Vigilance and Vigilance II
SV Stroke Volume mL Vigilance II
SVI SV Index mL/m
2
Vigilance II
EDV End Diastolic Volume mL Vigilance II
EDVI EDV Index mL/m
2
Vigilance II
ESV End Systolic Volume mL Vigilance II
ESVI ESV Index mL/m
2
Vigilance II
EF Ejection Fraction % Vigilance II
The Abbott Oxymetrix 3 SvO2/CCO monitor also provides CCO and SvO2. See the documentation
accompanying that device for information about these parameters and their calculation.
To Next Page
Loading...
Need help?
General
