Dräger Infinity Kappa User Manual

SOFTWARE U PGRADES
VF8 DELTA/DELTA XL/KAPPA 2-25
Software Upgrades
When upgrading the monitor from VF8.0 to VF8.2, the following settings must be
reconfigured and saved on each monitor:
— Parameter priority list for the main screen (see page 2-5)
— Trend graph scales (see page 6-5)
— Pacer detection setting (see page 8-4)
When upgrading the monitor from VF8.0 to VF8.3, the following settings must be
reconfigured and saved on each monitor:
—Masimo Averaging/ Averaging Time settings (see page 17-9)
—ECG Cable Type setting (see page 8-20)
After upgrading one monitor, save the settings on a memory card and copy the settings
to the rest of the installed monitors. Dräger recommends that all monitors be upgraded
to the same software version in all locations. Contact your DrägerService
representative to make sure that you are using the latest available software version.
DES Blue
LrSO2 and/or RrSO2 and/or S1rSO2 and/or S2rSO2and/or BL
NOTE: In the Show All Parameters menu only, the BL parameter is always
purple.
White
Parameter Default Color

Dräger Infinity Kappa Specifications

General

Brand	Dräger
Model	Infinity Kappa
Category	Medical Equipment
Language	English