1-26 DELTA/DELTA XL/KAPPA VF8
1 I
NTRODUCTION
Storing Events
Automatic Storage
The monitor stores events automatically, if you have first correctly configured the
Alarm Limits and Arrhythmia Setup tables.
You can enable individual parameter alarms in the
Alarms column of the Alarm
Limits and/or the ARR Setup screens. Configure event storage in the
Archive column
by selecting
Store or Str./Rec.
Storing Data Manually (Mark Key)
The Mark fixed key on the front of the monitor allows you to capture an event
manually. All data displayed on the Main Screen at the time of capture is archived for
later identification and comparison.
The number of events you can store depends on the
Max. Channels setting on the
Main Screen menu (see page 2-5). If the
Max. Channels setting is 8, the monitor
stores four sets of waveforms; if set to
6, the monitor stores three sets, etc. Waveforms
are captured, stored, and displayed in pairs.
To store data manually
Press the Mark fixed key on the front of the monitor to capture all
waveforms and parameter values currently displayed on the main screen.
To Next Page
Loading...
Need help?
General
