3-10 DELTA/DELTA XL/KAPPA VF8
3 N
ETWORK APPLICATIONS
Wireless Mode
Accessing wireless settings
1. Press the Menu fixed key.
2. Click on
Admit/Discharge.
3. Click on
Wireless.
4. Click on
Care Unit to select from a list of available care units.
5. Click on
Exit to return to the Wireless menu.
6. Click on
Bed Label to select from a list of available beds.
When the wireless mode is active, an icon appears with the date/time icon to
reflect signal strength. The icon and the date/time icon alternate with other secondary
messages in the network messaging area.
There are five different signal strength icons:
In wireless mode, the monitor uploads setups from the docking station and
communicates with all supported devices connected to the IDS.
NOTE: Wireless networking is a locked option. Contact your hospital’s technical
personnel for more information.
NOTE: Bed Label selection is ghosted until a valid care unit is selected.
NOTE: Wireless monitors cannot send recordings to a local recorder that is
connected to a CPS.
= 0 = 1-25 = 26-50 = 51-75 = 76-100
To Next Page
Loading...
Need help?
General
