2: General operation Model 2450 Interactive SourceMeter® Instrument
2-114 2450-901-01 Rev. B/September 2013
Copy a user setup
To copy a user setup from an external USB flash drive to the instrument from the front panel:
1. Insert the flash drive into the USB connector on the front panel.
2. Press the MENU key.
3. Under Scripts, select Manage. The MANAGE SCRIPTS window is displayed.
4. In the USB Scripts list, select the script you want to copy from the flash drive.
5. Select <. The file is displayed in the Internal Scripts box.
Delete a user setup
To remove a user setup from internal memory or the USB flash drive from the front panel:
1. Press the MENU key.
2. Under Scripts, select Manage. The MANAGE SCRIPTS window is displayed.
3. Under Internal Scripts or USB Scripts, select the name of the script.
4. Select Delete. A confirmation message is displayed.
5. Select OK.
To delete a user setup from internal memory using SCPI commands:
Overwrite an existing setup with the new setup. See Save a user setup to internal memory (on page
2-113).
To delete a user setup to internal memory using TSP commands:
To delete the setup, send the command:
script.delete("setupName")
Where setupName is the name of the script that will be deleted.
To Next Page
Loading...
Need help?
General
