Keithley 2450 User Manual

Section
8: TSP command reference Model 2450 Interactive SourceMeter® Instrument
Reference Manual
8-60 2450-901-01 Rev. B/September 2013
Example
file_num = file.open("testfile.txt",
file.MODE_WRITE)
if file_num != nil then
file.write(file_num,"This is my test file")
file.close(file_num)
end
Opens file testfile.txt for
writing. If no errors were found
while opening, writes "This is
my test file" and closes the
file.
Also see
None
file.read()
This function reads data from a file.
Type TSP-Link accessible
Affected by Where saved Default value
Function No
Usage
fileContents = file.read(fileNumber, readAction)
fileContents
The contents of the file based on the readAction parameter
fileNumber
The file number from file open command of the file to read
readAction
The action to do:
• Return the next line; returns nil if the present file position is at the end of the
file: file.READ_LINE
• Return a string with up to n characters; returns an empty string if n is zero;
returns nil if the current file position is at the end of file:
file.READ_NUMBER
• Return the whole file, starting at the present position; returns an empty string
if the present file position is at the end of the file:
file.READ_ALL
Details
This command reads data from a file.
Example
file_num = file.open("/usb1/testfile.txt",
file.MODE_READ)
if file_num != nil then
file_contents = file.read(file_num, file.READ_ALL)
file.close(file_num)
end
Open testfile.txt on the
thumb drive for reading. If it
opens successfully, read the
entire contents of the file and
store it in variable
file_contents.
Close the file.
Also see
None

Keithley 2450 Specifications

General

Brand	Keithley
Model	2450
Category	Test Equipment
Language	English