To Next Page

To Previous Page

Model 2450

Interactive SourceMeter® Instrument Reference Manual Section 8:

TSP command reference

2450-901-01 Rev. B/September 2013 8-245

tspnet.tsp.abort()

This function causes the TSP-enabled instrument to stop executing any of the commands that were sent to it.

Type TSP-Link accessible

Affected by Where saved Default value

Function

Usage

tspnet.tsp.abort(connectionID)

connectionID

Integer value used as a handle for other

tspnet

commands

Details

This function is appropriate only for TSP-enabled instruments.

Sends an abort command to the remote instrument.

Example

tspnet.tsp.abort(testConnection)

Stops remote instrument execution on testConnection.

Also see

None

tspnet.tsp.abortonconnect

This attribute contains the setting for abort on connect to a TSP-enabled instrument.

Type TSP-Link accessible Affected by Where saved Default value

Attribute (RW)

Restore configuration

Instrument reset

Power cycle

Configuration script

1 (enable)

Usage

tspnet.tsp.abortonconnect = value

value = tspnet.tsp.abortonconnect

value

1 (enable) or 0 (disable)

Keithley 2450 User Manual

Other manuals for Keithley 2450