Keithley 2450 User Manual

Section
8: TSP command reference Model 2450 Interactive SourceMeter® Instrument
Reference Manual
8-180 2450-901-01 Rev. B/September 2013
Example
trigger.lanout[5].assert()
Creates a trigger with LAN packet 5.
Also see
lan.lxidomain (on page 8-67)
trigger.lanin[N].clear() (on page 8-177)
trigger.lanin[N].overrun (on page 8-178)
trigger.lanin[N].wait() (on page 8-179)
trigger.lanout[N].assert() (on page 8-179)
trigger.lanout[N].ipaddress (on page 8-182)
trigger.lanout[N].protocol (on page 8-183)
trigger.lanout[N].stimulus (on page 8-184)
trigger.lanout[N].connect()
This function prepares the event generator for outgoing trigger events.
Type TSP-Link accessible
Affected by Where saved Default value
Function
Yes
Usage
trigger.lanout[N].connect()
N
The LAN event number (1 to 8)
Details
This command prepares the event generator to send event messages. For TCP connections, this opens the TCP
connection.
The event generator automatically disconnects when either the protocol or IP address for this event are changed.
Example
trigger.lanout[1].protocol =
lan.PROTOCOL_MULTICAST
trigger.lanout[1].connect()
trigger.lanout[1].assert()
Set the protocol for LAN trigger 1
to be multicast when sending LAN
triggers. Then, after connecting
the LAN trigger, send a message
on LAN trigger 1 by asserting it.
Also see
trigger.lanin[N].overrun (on page 8-178)
trigger.lanin[N].wait() (on page 8-179)
trigger.lanout[N].assert() (on page 8-179)
trigger.lanout[N].ipaddress (on page 8-182)
trigger.lanout[N].protocol (on page 8-183)
trigger.lanout[N].stimulus (on page 8-184)

Keithley 2450 Specifications

General

Brand	Keithley
Model	2450
Category	Test Equipment
Language	English