Keithley 2450 User Manual

Section
6: SCPI command reference Model 2450 Interactive SourceMeter® Instrument
Reference Manual
6-120 2450-901-01 Rev. B/September 2013
Details
This command returns the average reading calculated from all of the readings in the specified reading buffer.
Example
TRACe:STAT:AVERage?
Returns the average reading for the readings in the default
buffer
defbuffer1
.
TRACe:STAT:AVERage? "testData"
Returns the average reading for the readings in the user-
defined buffer
testData
.
Also see
Reading buffers (on page 3-10)
Remote buffer operation (on page 3-27)
:TRACe:MAKE (on page 6-114)
:TRACe:STATistics:CLEar (on page 6-120)
:TRACe:STATistics:MAXimum? (on page 6-121)
:TRACe:STATistics:MINimum? (on page 6-121)
:TRACe:STATistics:PK2Pk? (on page 6-122)
:TRACe:STATistics:STDDev? (on page 6-123)
:TRACe:STATistics:CLEar
This command clears the statistical information associated with the specified buffer.
Type Affected by Where saved Default value
Command only
Not applicable
Not applicable
Not applicable
Usage
TRACe:STATistics:CLEar
TRACe:STATistics:CLEar <bufferName>
<bufferName>
The name of the reading buffer, which may be a default buffer
(defbuffer1 or defbuffer2) or a user-defined buffer
Example
TRACe:STATistics:CLEar
Clear all statistics in defbuffer1.
TRACe:STATistics:CLEar "testData"
Clears all statistics in a user-defined buffer
named testData.
Also see
Reading buffers (on page 3-10)
Remote buffer operation (on page 3-27)
:TRACe:MAKE (on page 6-114)
:TRACe:STATistics:AVERage? (on page 6-119)
:TRACe:STATistics:MAXimum? (on page 6-121)
:TRACe:STATistics:MINimum? (on page 6-121)
:TRACe:STATistics:PK2Pk? (on page 6-122)
:TRACe:STATistics:STDDev? (on page 6-123)

Keithley 2450 Specifications

General

Brand	Keithley
Model	2450
Category	Test Equipment
Language	English