Interactive SourceMeter® Instrument Reference Manual Section 9:
Frequently asked questions (FAQs)
2450-901-01 Rev. B/September 2013 9-15
How do I trigger other instruments?
You can use the Model 2450 digital input/output to control an external digital circuit, such as a device
handler used to perform binning operations. For more information about the Model 2450 digital I/O
port, see Digital I/O (on page 3-62
).
You can also use the digital I/O in a trigger link system (TLINK) using a Model 2450-TLINK Trigger
Link Cable.
Another option is Keithley Instruments TSP-Link
®
, a high-speed trigger synchronization and
communication bus that you can use to connect multiple instruments in a master and subordinate
configuration. See TSP-Link System Expansion Interface (on page 3-118
) for additional information.
To Next Page
Loading...
Need help?
General
