Keithley 2450 User Manual

Section
6: SCPI command reference Model 2450 Interactive SourceMeter® Instrument
Reference Manual
6-122 2450-901-01 Rev. B/September 2013
Example
TRACe:STAT:MINimum?
Returns the minimum reading value in the default buffer
defbuffer1
.
TRACe:STAT:MINimum? "testData"
Returns the minimum reading value in the user-defined
buffer
testData
.
Also see
Reading buffers (on page 3-10)
Remote buffer operation (on page 3-27)
:TRACe:MAKE (on page 6-114)
:TRACe:STATistics:AVERage? (on page 6-119)
:TRACe:STATistics:CLEar (on page 6-120)
:TRACe:STATistics:MAXimum? (on page 6-121)
:TRACe:STATistics:PK2Pk? (on page 6-122)
:TRACe:STATistics:STDDev? (on page 6-123)
:TRACe:STATistics:PK2Pk?
This command returns the peak-to-peak value of all readings in the buffer.
Type Affected by Where saved Default value
Query only
Recall settings
Instrument reset
Power cycle
Not applicable
Not applicable
Usage
:TRACe:STATistics:PK2Pk?
:TRACe:STATistics:PK2Pk? <bufferName>
<bufferName>
A string that indicates the reading buffer; the default buffers
(defbuffer1 or defbuffer2) or the name of a user-
defined buffer; if no
buffer is specified, this parameter defaults to
defbuffer1
Example
TRACe:STAT:PK2Pk?
Returns the peak-to-peak reading value in the default
buffer
defbuffer1
.
TRACe:STAT:PK2Pk? "testData"
Returns the peak-to-peak reading value in the user-
defined buffer
testData
.
Also see
Reading buffers (on page 3-10)
Remote buffer operation (on page 3-27)
:TRACe:MAKE (on page 6-114)
:TRACe:STATistics:AVERage? (on page 6-119)
:TRACe:STATistics:CLEar (on page 6-120)
:TRACe:STATistics:MAXimum? (on page 6-121)
:TRACe:STATistics:MINimum? (on page 6-121)
:TRACe:STATistics:STDDev? (on page 6-123)

Keithley 2450 Specifications

General

Brand	Keithley
Model	2450
Category	Test Equipment
Language	English