To Next Page

To Previous Page

Model 2450

Interactive SourceMeter® Instrument Reference Manual Section 6:

SCPI command reference

2450-901-01 Rev. B/September 2013 6-61

:SOURce[1]:CONFiguration:LIST:CREate

This command creates an empty source configuration list for sourcing.

Type Affected by Where saved Default value

Command only

Recall settings

Instrument reset

Power cycle

Save settings

Not applicable

Usage

:SOURce[1]:CONFiguration:LIST:CREate <name>

<name>

A string that represents the name of a source configuration list

Details

This command creates an empty configuration list. To add configuration points to this list, you need to use the

store command.

Configuration lists are not saved when the instrument is turned off. If you want to save a configuration list, use a

saved setup to store the instrument settings, which include defined configuration lists.

Examples

:SOURce:CONF:LIST:CRE "MySourceList"

Creates a source configuration list named MySourceList.

Also see

Configuration lists (on page 3-33)

*SAV (on page 6-2)

:SOURce[1]:CONFiguration:LIST:STORe (on page 6-65)

Keithley 2450 User Manual

Other manuals for Keithley 2450