Keithley 2450 User Manual

Section
3: Functions and features Model 2450 Interactive SourceMeter® Instrument
Reference Manual
3-38 2450-901-01 Rev. B/September 2013
Instrument settings stored in a source configuration list
When you save a configuration point to a source configuration list, the instrument saves the values for
each setting listed in the following table. These settings can be set from the front panel or by using
remote commands. The table lists SCPI and TSP commands that can be used to set these settings.
Source configuration list settings
Front-panel setting TSP command SCPI command
Function
FUNCTION key
smu.source.func (on page 8-
134)
:SOURce[1]:FUNCtion[:MODE] (on page 6-72)
AutoRange
HOME > Source Range
smu.source.autorange (on
page 8-127)
:SOURce[1]:<function>:RANGe:AUTO (on page 6-75)
Delay
MENU > Source > Settings > Source
Delay
smu.source.delay (on page 8-
133)
:SOURce[1]:<function>:DELay (on page 6-66)
Auto delay
Not available from the front panel
smu.source.autodelay (on
page 8-128)
:SOURce[1]:<function>:DELay:AUTO (on page 6-67)
Source level
HOME > Source
smu.source.level (on page 8-
135)
:SOURce[1]:<function>:<x>LIMit[:LEVel] (on page 6-71)
Overvoltage protection
MENU > Source > Settings >
Overvoltage Protection Limit
smu.source.protect.level (on
page 8-141)
:SOURce[1]:<function>:PROTection[:LEVel] (on page 6-
73)
Output off state
MENU > Source > Settings > Output
Off State
smu.source.offmode (on page
8-139)
:OUTPut[1]:<function>:SMODe (on page 6-31)
Range
MENU > Source > Settings > Source
Range
smu.source.range (on page
8-143)
:SOURce[1]:<function>:RANGe (on page 6-74)
Limit
HOME > Limit
smu.source.xlimit.level (on
page 8-137)
:SOURce[1]:<function>:<x>LIMit[:LEVel] (on page 6-71)
High capacitance
MENU > Source > Settings > Hi
Capacitance
smu.source.highc (on page 8-
135)
:SOURce[1]:<function>:HIGH:CAPacitance (on page 6-
69)
Readback
MENU > Source > Settings > Source
Readback
smu.source.readback (on
page 8-144)
:SOURce[1]:<function>:READ:BACK (on page 6-77)
User delays
Not available from the front panel
smu.source.userdelay[N] (on
page 8-153)
:SOURce[1]:<function>:DELay:USER<n> (on page 6-68)
Source output
Output on/off switch
smu.source.output (on page
8-140)
:OUTPut[1][:STATe] (on page 6-34)

Keithley 2450 Specifications

General

Brand	Keithley
Model	2450
Category	Test Equipment
Language	English