Konica Minolta REGIUS 190 Service Manual

90
2.7 Electrical Unit
REGIUS MODEL 190 Service Manual Ver.1.00 2004.11.01
2.7.8 Replacement of TAP (Power Supply Voltage Switching Board)
1.
Remove the rear cover. (See p.28 )
2.
Unplug 5 connectors from the TAP.
• CN1, CN2, CN3, CN4, JP1
3.
Remove 4 fixing screws, and pull out the TAP.
4.
Carry out reassembly in the reverse order to that described
above.
• Remarks for installation
• When connecting JP1 to the new board, select the wire
color suitable to the power supply (AC) of the facility.
TAP (Power Supply Voltage Switching Board)
JP1
CN2
CN4
CN1
CN3
Wire
Color
Br Red Or Y Pink Blue
Power
Voltage
100V 110V 120V 200V 220V 240V

Konica Minolta REGIUS 190 Specifications

General

Brand	Konica Minolta
Model	REGIUS 190
Category	Medical Equipment
Language	English