Konica Minolta REGIUS 190 Service Manual

155
4.4 Error Code
REGIUS MODEL 190 Service Manual Ver.1.00 2004.11.01
4.4.3 Mechanical Control Error Code (04101 ~ 04106)
04101 ~ 04106 indicates an error occurred on the motors.
Error
code
Error name Error description Action
04101 Subscan motor NG A deviation occurred between the
elevation pulse number and the
descent pulse number (i.e., HP
motion) during initialization opera-
tions for subscanning.
Check MCB2:CN5-, pins 16 through 18
(Subscan HP Sensor) and MCB2:CN6
(Subscan Motor)
04102 Transportation Motor
NG
A deviation occurred between the
pulse number for [insertion posi-
tion -->Escape Position motion]
and the pulse number for [Escape
Position --> insertion position
motion] during initialization opera-
tions for the Transport Unit.
Check MCB2:CN11-, pins 32 through 34
(Feed HP sensor); MCB2:CN11-, pins
35 through 37 (Feed excape position
sensor); and MCB2:CN15 (Transporta-
tion Motor)
04103 Elevator motor NG A deviation occurred between the
descent pulse number and the
elevation pulse number (i.e., HP
motion) during initialization opera-
tions for the elevation bed.
Check MCB2:CN11-, pins 26 through 28
(Elevator HP Sensor) and MCB2:CN16
(Elevator Motor)
04104 Justification motor NG A deviation occurred between the
closing-direction pulse number
and the opening-direction pulse
number (i.e., HP motion) during
initialization operations for justifi-
cation.
Check MCB2:CN11-, pins 29 through 31
(Justification HP Sensor) and
MCB2:CN17 (Justification Motor)
04105 Insertion shutter open/
close time-out
A time out occurred due to lack of
response from the sensor upon
opening or closing of the installa-
tion port shutters.
Check MCB2:CN10-, pins 11 through 13
(Insertion Shutter Open Sensor);
MCB2:CN10-, pins 14 through 16 (shut-
ter closed sensor); and MCB2:CN10-,
pins 3 through 4 (Shutter Motor)
04106 Lock time-out A time out occurred due to lack of
response from the sensor upon
locking.
• Check MCB2:CN11-, pins 3 through
5 (Lock Release Sensor) and
MCB2:CN11-, pins 1 and 2 (Lock
Release Motor)
• Check the plunger pin is actuating. if
it is not smoothly action ig, replace
the cassette receive unit. (p.54)

Konica Minolta REGIUS 190 Specifications

General

Brand	Konica Minolta
Model	REGIUS 190
Category	Medical Equipment
Language	English