Konica Minolta REGIUS 190 Service Manual

183
A.1 SCB2 Dummy Program Screens
REGIUS MODEL 190 Service Manual Ver.1.00 2004.11.01
A.1.10 "Firmware Update Parameters" Dialogue
This dialogue will appear when "Update firm ..." is selected in
"Command" menu of the main window. ("A.1.1 Main Window,
p.169")
Do not change the setting unless otherwise instructed.
Important If the update of the firmware is imple-
mented only on the MCB2, and not on the
SCB2 may cause malfunction of the
REGIUS 190 depending on the combina-
tion of versions.
Item Description
Update Loader unit Select this to update the loader of the firmware on the flash memory of MCB2.
Update Main unit Select this to update the main of the firmware on the flash memory of MCB2.
[Browse ...] Displays the dialogue on which a selection of firmware file (*.bin) can be made.

Konica Minolta REGIUS 190 Specifications

General

Brand	Konica Minolta
Model	REGIUS 190
Category	Medical Equipment
Language	English