174
A.1 SCB2 Dummy Program Screens
REGIUS MODEL 190 Service Manual Ver.1.00 2004.11.01
A.1.5 "SCB2 Properties" Dialogue
This dialogue will appear when "Network Error" is selected in
"Command" menu of the main window. ("A.1.1 Main Window,
p.169")
Do not change the setting unless otherwise instructed.
Item Description
Error code Specifies the error code which shall be sent to the MCB2.
Occurrence / Release Specifies whether it is error occurrence or reset.
MAC address Specifies the MAC address which shall be sent to the MCB2.
IP address Specifies the IP address which shall be sent to the MCB2.
To Next Page
Loading...
Need help?
General
