Konica Minolta REGIUS 190 Service Manual

124
3.8 Checking and Adjusting the Justification Allowance
REGIUS MODEL 190 Service Manual Ver.1.00 2004.11.01
3.8 Checking and Adjusting the Justification Allowance
Set the 14" x 17" cassette on the justification mechanism, and
measure the gap between the justification control guide-R1 and
justification control guide-R2.
Criterion: 1 ~ 3mm
• If the drive pulley is loose, tighten the drive pulley at the
force of 0.6N•cm (6kgf•cm) using a torque driver.
Justification Control
Guide-R1
Left Right
Justification Control
Guide-R2
Gap
3 Different Aspects of
Justification Mechanism

Konica Minolta REGIUS 190 Specifications

General

Brand	Konica Minolta
Model	REGIUS 190
Category	Medical Equipment
Language	English