Related Links
Configuring the Software on page 239
Related Links
Configure Admin ID and Password on page 242
Configure Admin ID and Password
You can set an admin ID and password, which allows you to limit access to the Polycom Touch Control
Administration settings.
Procedure
1. From the Home screen touch Administration.
An admin ID and password might be configured for the Touch Control Administration settings. The
default ID is admin and the default password is 456.
2. Touch the Security tab.
3. Set the following security settings.
Setting Description
Admin ID Specifies the ID for the administrator account. The
default Admin ID is admin.
Admin Password Specifies the password for administrator access when
logging in to the Polycom Touch Control. The default
password is 456.
When this password is set, you must enter it to
configure the Polycom Touch Control Admin Settings.
The password must not contain spaces.
Related Links
Configuring the Software on page 239
Related Links
Configure Location and Time Settings on page 241
Powering On the Polycom Touch Control
You can power on the Polycom Touch Control. For details, see the following topic.
Related Links
Set Up the Polycom Touch Control on page 238
Power Off the Polycom Touch Control
You can power off the Polycom Touch Control.
Procedure
1. From the Touch Control Home screen, touch User Settings.
Setting Up a Polycom Touch Control Device
Polycom, Inc. 242
To Next Page
Loading...
Need help?
General
