Polycom realpresence group series Administrator's Guide

Secure API Access on page 92
Related Links
Add IP Addresses to a Whitelist on page 96
Add IP Addresses to a Whitelist
You can edit and add specific IP addresses to a whitelist for your RealPresence Group Series system.
Procedure
1. Click the Edit Whitelist link.
2. Select address type IPv4 or IPv6.
3. In the address text field, enter the IP address of the system you want to allow.
Follow the format suggested by the address type you selected. Select Add.
Repeat this step for all the IP addresses you want to add. You can add web server and SNMP
addresses.
If you entered an address in error, highlight the address in the list and select Clear.
Related Links
IPv4 Address Formats on page 96
IPv6 Address Formats on page 96
Related Links
Enable a Whitelist on page 95
IPv4 Address Formats
The whitelist configuration requires a single IP address, a range of addresses, or an IP and netmask.
(The netmask represents the number of valid bits of the IPv4 address to use.)
Here are valid IPv4 formats for your RealPresence Group Series system:
• 10.12.128.7
• 172.26.16.0/24
Related Links
Add IP Addresses to a Whitelist on page 96
IPv6 Address Formats
For IPv6 addresses, you can use a Classless Inter-Domain Routing (CIDR) notation to represent a range
of IP addresses.
Here are valid IPv6 formats for your RealPresence Group Series system:
• ::1
• 2001:db8:abc:def:10.242.12.23
• 2001:db8::/48
• 2001:db8:abcd:0012::0/64
• 2001:0db8:85a3:0000:0000:1234:0abc:cdef
Related Links
Add IP Addresses to a Whitelist on page 96
Securing the System
Polycom, Inc. 96

Polycom realpresence group series Specifications

General

Brand	Polycom
Model	realpresence group series
Category	Conference System
Language	English