Bit Switches
SM 53 D432/D433
D432/D433
Fax Option
Type
C2550/C2530
4.3 BIT SWITCHES
Do not adjust a bit switch or use a setting that is described as “Not used”, as this
may cause the machine to malfunction or to operate in a manner that is not
accepted by local regulations. Such bits are for use only in other areas, such as
Japan.
Default settings for bit switches are not listed in this manual. Refer to the System
Parameter List printed by the machine.
4.3.1 SYSTEM SWITCHES
System Switch 00 [SP No. 1-101-001]
No FUNCTION COMMENTS
0
Dedicated transmission
parameter programming
0: Disabled, 1: Enabled
Set this bit to 1 before changing any dedicated
transmission parameters.
Reset this bit to 0 after programming dedicated
transmission parameters.
1
Not used
Do not change
To Next Page
Loading...
Need help?
General
