EasyManuals Logo
Home>Ricoh>All in One Printer>Aficio MP C2030

Ricoh Aficio MP C2030 Service Manual

Ricoh Aficio MP C2030
1171 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #158 background imageLoading...
Page #158 background image
Controller Options
D037/D038/D040/D041 2-108 SM
9. Insert the SD card in the SD card slot 2 of the machine and turn the main power on.
Starting the application
1. Press the “User Tools/Counter” key, then press the “Extended Feature Settings” button
and press the “Extended Feature Setting” button that appears. If required, log in as a
machine administrator.
2. Press “Startup”, then change the status to “Starting up” for each application.
3. Press “Administrator Tools”, then press “Heap/Stack Size Settings”. Program the heap
size and stack size as the settings as before.
4. Turn the main power off and on.
5. Enter the “Extended Feature Settings” menu again, and check the version of the VM
card firmware on the “Extended Feature Info” screen.
The version of the VM card firmware is also shown on the Self Diagnostic Report
(a part of the SMC report). But the version on the Self Diagnostic Report is not
changed after updating.
2.22.12 BROWSER UNIT TYPE E (D038/D041 ONLY)
IMPORTANT: Whenever installing an SDK application on this model (e.g. the VM Card or
Browser Unit), the Memory Unit Type I: 512MB must also be installed.
Installation Procedure
IMPORTANT: The Browser Option can only be installed on one machine. Once the
installation is complete it cannot be installed on any other machine after that
, even if it is
uninstalled from the original machine.
1. For models which have the VM card, do the following. Then
continue with step 3:
- Press “User tools” button to enter the User Tools mode.
- Press “Extended Feature Settings” on the LCD.
- Press “Extended Feature Settings” on the LCD again.
- Press “Start up” tab.
- Stop all SDK applications with touching application lines.
- Exit UP mode, turn off the machine and unplug the power cord
- Remove the slot cover for SD cards.
- Remove the SD card (VM/JAVA) from SD slot 2.
2. Turn off the machine and unplug the main machine power cord.
3. Turn the Browser SD card label face to the rear of the machine. Then push it slowly
into the slot until you hear a click.
Rev. 10/13/2011

Table of Contents

Other manuals for Ricoh Aficio MP C2030

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ricoh Aficio MP C2030 and is the answer not in the manual?

Ricoh Aficio MP C2030 Specifications

General IconGeneral
BrandRicoh
ModelAficio MP C2030
CategoryAll in One Printer
LanguageEnglish

Related product manuals