SC Tables
D037/D038/D040/D041 4-2 SM Appendix
After you turn the main power switch off, wait for one second or more before you turn the
main power switch on ( SC 672). All SCs are logged. The print log data (SP5-990-004) in
SP mode can check the latest 10 SC codes detected and total counters when the SC code is
detected.
If the problem concerns electrical circuit boards, first disconnect then reconnect the
connectors before you replace the PCBs.
If the problem concerns a motor lock, first check the mechanical load before you
replace motors or sensors.
SC Code Classification
The table shows the classification of the SC codes:
Class 1 Section SC Code Detailed section
100 - Scanner
1XX Scanning
190 - Unique for a specific model
200 - Polygon motor
220 - Synchronization control
230 - FGATE signal related
240 - LD control
2XX Laser exposure
280 - Unique for a specific model
300 - Charge
330 - Drum potential
350 - Development
3XX Image development 1
380 - Unique for a specific model
400 - Image transfer
420 - Paper separation
4XX Image development 2
430 - Cleaning
To Next Page
Loading...
Need help?
General
