SC Tables
SM Appendix 4-67 D037/D038/D040/D041
Appendix:
Service Call
Conditions
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
The NetFile file management on the HDD cannot be used, or a NetFile
management file is corrupted and operation cannot continue. The
HDDs are defective and they cannot be debugged or partitioned, so the
Scan Router functions (delivery of received faxes, document capture,
etc.), Web services, and other network functions cannot be used.
HDD status codes are displayed below the SC code:
925
CTL
B
Refer to the four procedures below (Recovery from SC 925).
List of HDD status codes:
Display Meaning
(-1) HDD not connected
(-2) HDD not ready
(-3) No label
(-4) Partition type incorrect
(-5) Error returned during label read or check
(-6) Error returned during label read or check
(-7)
“filesystem” repair failed
(-8)
“filesystem” mount failed
(-9) Drive does not answer command
(-10) Internal kernel error
(-11) Size of drive is too small
(-12) Specified partition does not exist
(-13) Device file does not exist
Recovery from SC 925:
Procedure 1
If the machine shows SC codes for HDD errors (SC860 to SC865) with SC 925, do the
recovery procedures for SC860 to SC865.
⇒
Rev. 01/2009
To Next Page
Loading...
Need help?
General
