Suzuki Samurai 1987 User Manual

13-5. INSPECTION OF COMPONENTS
Gears
Check each part for wear, damage or discolora-
tion. Replace if found defective.
Fig. 13-31
Fig. 13-29
Synchronizer Hubs, Sleeves and Keys
Check each part for wear or damage. Replace if
found defective.
Fig. 13-30
Shift Forks and Sleeves
Check contact surfaces for wear or damage.
Measure clearance between fork and sleeve.
I
Maximum clearance
j 1.0 mm (0.039 in) 1
Main Shaft
Check each part of shaft for wear, discoloration
or damage. Replace shaft if any part is found
defective.
Fig. 13-32
Bearings and Bushes
Check each part for wear, damage or discolora-
tion. With ball bearing, check to ensure that it
rotates smoothly and it does not make noise.
Replace if found defective.
Fig. 13-33
13-12

Suzuki Samurai 1987 Specifications

General

Brand	Suzuki
Model	Samurai 1987
Category	Automobile
Language	English