13-7. MAINTENANCE SERVICES
Transmission Oil
Before changing oil, check for oil leakage first
and correct defects, if any. Fill specified new oil
in specified amount.
Oil capacity
1.3 litres
(2.75/2.29 US/Imp. pt.)
I
Oil specification
Gear oil, SAE
8OW-90,75W-80
or
75W-90
I
It
is.
highly recommended to use SAE
75W-90
.
gear oil.
For viscosity chart, refer to
P.
I-20.
Fig. 13-85
@
Oil filler plug
@
Oil drain
plup
@
Oil level plug
After filling transmission with oil, torque oil
filler and drain plugs to specification.
Tightening torque
N.m
for oil drain and
kg-m
lb-ft
filler plug
18-28 1.8-2.8 13.5-20.0
Tightening torque
for oil level plug
lo-16
1.0-1.
7.5-11.
5
NOTE:
Whenever car was hoisted for any other service
work than oil change, also be sure to check for
oil leakage.
When installing oil drain and filler plugs to
transmission case,
aipply
sealant (SUZUKI
BOND
No.1215,
99000-31110) to thread part
of plug.
13-25