Xerox Nuvera User Manual

Double reverseSingle ReverseSingle StraightColorBankWeightType
3R972310White5200Colotech Tabs
3R97232White10
Note
On Tab stock, intermittent marks from photoreceptor seams may be seen on the tabbed area of the
media.
For more information, see Loading Special Stock for Proper Finishing Output
Using the Feed Module Tab Guides
Use the Feed Module Tab Guides to improve the feeding of tab stock from any tray in the Feed Module.
Note
Do not use tab stock unless you install the appropriate Tab Guide in the paper tray where the tab stock
is loaded.
There are two Tab Guides:
• The A4/11" Tab Guide
• The A5/5.5" Tab Guide
Both of the Tab Guides are mounted on brackets or in a molded pocket located inside the Feed Module
Front Door.
Installing the Feed Module Tab Guides
1. Program your job as you normally would, including programming of Tabs stock as either the main
body of the job or as special pages or inserts.
2. Open the tray and remove the paper stock, if required. Move the paper guides to the open position
in order to accommodate the size of the tab stock.
3. Load the tabs into the tray. The label on the tray illustrates how to load the tab stock.
12-7Xerox
®
Nuvera
®
User Guide and Training Aid (UGTA)
Setting Up Complex Jobs

Xerox Nuvera Specifications

General

Brand	Xerox
Model	Nuvera
Category	Printer
Language	English