NoteRecommendationCommon UsesStock Type
• For all transparencies,
refer to the label on the
tray for correct orienta-
tion.
• When using transparen-
cies with removable
stripes, load with the
stripe down in Tray 1 -
4.
• Do not program 2-
sided.
• For best results, set
HeavyWeightattribute
when programming
Trays 1 - 4.
• Nuvera supports only 8
1/2 x 11" (A4) transpar-
encies.
Self-adhesive labels for en-
velopes and packaging
Labels
• Do not program 2-
sided.
• For best results, feed la-
bels into the machine
LEF only.
• Load face-up in Trays 1
- 4.
• For best results, set
HeavyWeightattribute
when programming
Trays 1 - 4.
Paper Through Document Feeder Performance Matrix
The Xerox Nuvera can process a wide array of stock types. Use the following topics to learn how each
stock type can be expected to perform in the system.
Tip
If you're having feeding problems through the Document Feeder, all problems can be avoided by
scanning directly from the Document Glass.
NotesRatingTypes and Conditions
of Originals
A 12x18 inch original actually will travel through the Docu-
ment Feeder, but there is a good chance some information
on the output will be lost. To ensure all image information
from a 12 x 18 inch original is captured, use the Document
Glass.
Do Not Feed12 x 18 inch originals
Xerox
®
Nuvera
®
10-8
User Guide and Training Aid (UGTA)
Expected Paper Handling
To Next Page
Loading...
Need help?
General