The MFF Professional Model
MFF Stapling
Portrait, Landscape and Dual stapling is available for all media types, except Tabs and Transparencies.
Stapling is offered for mixed sized sets if the length of the feed edge is the same size for all sheets.
For details and specifications on the staplers, see Stapler Specifications.
MFF Capacities
The Xerox Nuvera Multifunction Finisher (MFF) adds the finishing touches to your job by collating and
stapling your output. The MFF Professional can be used to make folded and stapled booklets and various
folding options; Folded-Only Booklets, Tri-Fold C-Configuration and Z-Configuration folded documents.
• 2,250 sheet total capacity of 20 lb. (75-80 gsm) paper or equivalent
• 250 sheet Top Tray
• 2,000 sheet Main Tray
• 1 and 2 Position Stapling in Main Tray
• 100 sheet staple capacity, sizes 8.5 x 14 inch or B4 and smaller. Contacting Xerox to order this
consumable part.
• 50 sheet staple capacity paper sizes over 8.5 x 14 inch or B4. Contacting Xerox to order this consumable
part.
Top Tray
Output to the Top Tray is delivered with Side-1 down and sets are not offset. The Top Tray can hold up
to 250 sheets of 20 lb. (75-80 gsm) or equivalent paper. It can be set as a destination tray for non-stapled
jobs. Copies that are less than 6.7 inches long in feed direction or 8 inches in the cross-feed direction
will go to the Top Tray rather than the Main Tray. The Top Tray also receives sheets that are purged
from the system when using the Main Tray or the Bottom Tray.
Main Tray
The Main Tray is the output tray for receiving compiled stapled and unstapled sets as well as single
sheets. Output is delivered with Side-1 down and sets are offset. It can staple up to 100 sheets of 8.5 x
11 inch or A4 LEF, and 8.5 x 14 inch or B4 SEF of 20 lb. (75-80 gsm). It also can staple up to 50 sheets
for paper sizes over 8.5 x 14 inch or B4 SEF of 20 lb. (75-80 gsm). Portrait, landscape, and dual position
stapling are available.
"Stack Limit" allows you to set the Main Tray to the size of the stack from 200 to 2500 sheets. Once the
set stack limit is achieved, the system will cycle down and display an Empty Main Tray message. The
default setting is 2500 sheets.
21-13Xerox
®
Nuvera
®
User Guide and Training Aid (UGTA)
Machine Specifications
To Next Page
Loading...
Need help?
General