15
Replacing Consumables
This section covers procedures for maintaining your Xerox Nuvera.
Consumables can be defined as any parts or supplies that need replacing periodically in order for the
machine to perform all of its functions.
Click the links at the left to learn how to change or replace consumables.
For Customer Support telephone numbers and the reorder part numbers of supplies, go to Telephone
numbers and World Wide Web address.
Replacing the Developer Waste Container
The Developer Waste Container gets replaced after every 800,000 images. When the machine has
reached the limit set for the Developer Waste Container, an alert will appear in the system messages
portion of the user interface.
To replace the Developer Waste container
Double-click the system alert to see details about the action needed, instructions on how and where to
return the used container, as well as the location of the container.
See Contacting Xerox to get the correct part number for this container.
Make sure there are no jobs running.
1. Open the front access covers and identify the correct container.
2. Prepare the new container for installation.
3. Remove the used container.
4. Insert the new container, making sure it is completely seated.
5. Package the used container for return. Use the box and prepaid return label to return the old unit to
Xerox.
15-1Xerox
®
Nuvera
®
User Guide and Training Aid (UGTA)
To Next Page
Loading...
Need help?
General