12
Setting Up Complex Jobs
In addition to running basic jobs, you can also process more complex jobs such as:
• Converting single-sided (simplex) documents into 2-sided (duplex) documents
• Creating booklets
• Creating folded documents
• Printing on tabbed stock
• Running jobs with several types of paper stock
• Collate sets
• Adding pages to a document
• Using Background Forms
To learn about book printing productivity when setting up your job to print stock greater than 9.0 inches
wide up to 9.5 inches wide, refer to the Wide Stock Mode feature in the Printer menu: Media Optimization
window.
For special considerations around the 157/314 system configuration with a BFM, refer to Basic Finishing
Module (BFM/BFM Plus) Specifications
To learn more about the more complex tasks the Xerox Nuvera is capable of processing, explore the
links at the left.
Printing/Copying on Tabbed and Ordered Stock
Because of the special procedures required to use tabs, take time to review this section before attempting
to use tabs with the Xerox Nuvera .
Note
For information on loading tabbed stock in the Sheet Feed Module, see Using the Feed Module Tab
Guides. You must have the Tabs Guide installed in the feed tray that contains the tabbed stock.
Note
Pre-cut tabs can only print 1-sided. Full-cut tabs can print on both sides, either simplex or duplex.
12-1Xerox
®
Nuvera
®
User Guide and Training Aid (UGTA)
To Next Page
Loading...
Need help?
General