• Do not set up the machine near a heat source.
• Do not set up the machine in direct sunlight.
• Do not set up the machine in line with the cold airflow from an air conditioning system.
• Do not place containers of coffee or other liquid on the machine.
• Do not block or cover the slots and openings on the machine.
• Do not attempt to override any electrical or mechanical interlock devices.
Warning
Be careful when working in areas identified with this warning symbol. These areas may be very hot and
should not be touched.
If you need any additional safety information concerning the machine or materials, contact your Xerox
representative.
Maintenance Information
Any operator product maintenance procedures will be described in the user documentation supplied
with the product.
Do not carry out any maintenance on this product which is not described in the customer documentation.
Warning
Do not use aerosol cleaners. Aerosol cleaners can be explosive or flammable when used on
electromechanical equipment.
Use supplies and cleaning materials only as directed in the Operator section of this manual.
Do not remove covers or guards that are fastened with screws. There are no parts behind these covers
that you can maintain or service.
Note
Your Xerox machine is equipped with an energy saving device to conserve power when the machine is
not in use. The machine may be left on continuously.
Warning
The metallic surfaces in the fuser area are hot. Please use caution when removing paper jams from this
area and avoid touching any metallic surfaces.
Consumable Information
Store all consumables in accordance with the instructions given on the package or container.
Keep all consumables away from the reach of children.
Never throw toner, print cartridges, or toner containers into an open flame.
Xerox
®
Nuvera
®
3-8
User Guide and Training Aid (UGTA)
Safety and Certifications
To Next Page
Loading...
Need help?
General