Xerox Production Stacker (XPS)
The Xerox Production Stacker (XPS) with Document Finishing Architecture (DFA) Finishing is a finishing
option available for the Model IV Nuvera.
This finishing device provides output trays that eject and rise to near waist height of the user. If the
height selected is not appropriate, this height can be adjusted. The sheet capacity for these output trays
is increased from other stackers. The XPS stacks 5,700 (2 stacks of 2,850). The stacker can be released
to unload while the system is still running and printing, which allows for constant production. This is also
true when using a single stacker.
For more detailed information about the XPS, refer to the Xerox Nuvera® Xerox Production Stacker
Operator Manual.
Licensed Features
The software options available to you depend on the licenses that were installed and enabled on your
system at installation. The following lists some of the major licenses available for the system. Check
with your System Administrator for more information on what licenses are enabled.
• Productivity Pack - when enabled, this license provides multiple print queues instead of one queue,
Stock Library management, shows all media attributes, and is required for LCDS and IPDS printing.
Also includes the ability to enter the paper weight for the stock that is being loaded.
• Enhanced Line Screen - when enabled, this license allows all valid halftones to print (85 lpi, 106 lpi,
125 lpi, 134 lpi and 156 lpi) and offers additional halftone image quality settings.
• PCL License
• Ethernet License - Bus & Tag are optional
• PS License
• DFA License
• Imposition License
• LCDS License
• IPDS License
• VIPP License (FreeFlow VI Interpreter)
• Disk Overwrite License
• Full, Basic, CPW (XPP) or ISO Diagnostics License
Xerox
®
Nuvera
®
6-4
User Guide and Training Aid (UGTA)
Xerox Nuvera EA/MX Production System
To Next Page
Loading...
Need help?
General