If a system fault condition occurs and requires a dynamic purge of sheets, the machine will shut down
after the purge is completed. Similarly, if the system shuts down hard with a fault condition, after clearing
the jam the system will cycle up, purge the paper path contents, and shut down again. After both of
these two types of conditions, a status message will display to instruct the operator about job recovery.
Be sure to disable Serialized Stock Mode when finished to restore full auto job recovery.
To enable Serialized Stocks mode:
1. From the FreeFlow Print Server user interface, select Printer > Media Optimization.
The window containing all selections displays. Serialized Stock is above the area containing Media
Optimization Switches.
2. Select Serialized Stock Mode and OK.
You are now running in Serialized Stock mode which will print your job as programmed and will only
prompt you for job recovery assistance following a system fault condition.
3. When you have completed running jobs that include serialized stock, make sure you exit the Serialized
Stock mode by selecting Printer > Media Optimization and clearing Serialized Stock Mode from
inside the window containing the selections.
About Impositions
Imposition is the process of positioning multiple page images on a single output sheet to be printed at
one time. Imposition has no effect on the content of any individual page image; it only affects the size
of the page image and where the pages are placed on an output sheet.
Imposition options include the ability to create 2-up to multiple-ups documents including custom
multiple-up For a custom multiple-up, the Xerox Nuvera automatically calculates how many images will
fit on the sheet size selected for the job. Imposition settings are provided for setting gutter margins and
Repeated, Sequential, and Alternating image on sheet outputs.
A Signature is the name given to a single sheet of paper or other substrate after it has been folded.
Many books are made up of signatures. The manner in which signatures are bound influences the way
that they must be printed.
For more information about setting up impositions, see Setting Imposition Options.
Impositions and Saddle Stitched Books
Saddle stitched books and calendars consist of all the signatures nested in one group with staples inserted
at the fold. When signatures are nested, the fold, or gutter, gets wider the further a sheet is from the
centerfold (see Figure 1).
Note
Page frame shifting is done automatically.
Therefore, page frames must be shifted slightly to compensate for the thickness of the gutter. The page
frames are moved slightly away from the fold and toward the outside edge. This results in the outside
margin becoming narrower. When finished, the sheets closer to the centerfold (with the narrower fold)
will have more trimmed from the outside margin. When done properly, the images will appear in the
same position on each page as the pages are flipped.
12-13Xerox
®
Nuvera
®
User Guide and Training Aid (UGTA)
Setting Up Complex Jobs
To Next Page
Loading...
Need help?
General