Xerox Nuvera User Manual

Note
Contact your System Administrator to configure custom System Preferences.
Note
Refer to the Xerox Nuvera online help for details about System Preferences settings.
Using Xerox FreeFlow Remote Print Server Software
FreeFlow Remote Print Server software allows access to the Xerox Nuvera user interface from a remote
client (i.e., the computer at your own desk). Remote print server software provides the functionality of
the Xerox Nuvera at a remote desktop, enabling the user, from anywhere on the network, to use the full
range of Xerox Nuvera functions.
Note
New major releases of FreeFlow Print Server require updated versions of FreeFlow Remote Print Server
software. Verify that you have the correct Remote Print Server version to match your version of FreeFlow
Print Server software. Contact your System Administrator to have FreeFlow Remote Print Server software
installed and configured on your computer.
Note
FreeFlow Remote Print Server software does not support the IPS Manager.
Adding Annotations to your Jobs
Note
This feature is only available if your system includes the integrated Document Scanner module for
copying and scanning jobs.
The following information applies to both Print and Copy jobs.
There may be times when you need to add extra content to your job. The Annotation feature allows
you to add these special marks:
• Page Numbers--can be configured to appear anywhere on each page
• Watermarks--Indicates to the reader that the document they have is Confidential, Draft, etc. The
watermark appears as shaded text behind the actual page content
• Date Stamps
Annotation can be a queue setting. Any job being sent to that queue will be annotated.
The Xerox Nuvera systems that have the Productivity Pack license allowing for multiple queues have a
Queue manager to create new queues.
The Xerox Nuvera systems without the Productivity Pack license set up the system preferences. By
default, all annotations are set to off.
Print jobs refer to jobs being reprinted on the device. Any jobs being submitted through a driver use the
watermark available on the driver. If a queue is set up for annotations and a print job comes into that
queue, then it will be annotated on the queue properties.
Note
If you forward a job from one machine to another, the forwarded job will lose its annotation attributes
as well as Printer Darkness settings and imposition attributes.
Xerox
®
Nuvera
®
14-80
User Guide and Training Aid (UGTA)
How Do I...

Xerox Nuvera Specifications

General

Brand	Xerox
Model	Nuvera
Category	Printer
Language	English