Sheet Feed Modules
4-Tray Feed Module - two standard stock size and two large stock size feed trays. It can be used with
the Roll Feeder option.
2-Tray Feed Module - two high capacity large stock feed trays. Sheet Feed Modules (SFM)
Roll Feeder - provides up to 25,000 11 x 17 inch size sheets and 5 hours of continuous run time between
roll changes.
Integrated Scanner - scans single pass duplex at 120 ppm.
Post Process Module
Sheet Enhancement Module - located directly to the right of the print engine, this module is used to
remove upcurl or downcurl in paper as it passes through the module from the print engine.
Sheet Enhancement Module (SEM)
FreeFlow Print Server and Print Engine
Control Console - houses the computer components that drive your Xerox Nuvera system. The mouse
driven UI provides access to the tools to manage jobs and the system. Control Console
Print Engine - xerographics module Print Engine Module
Additional Configurations
You can customize the system by identifying whether to include an integrated scanner, a second Sheet
Feeder Module, an insertion module and the complexity of your finishing devices. The type of finisher
you select can determine what other modules and license configuration options can be included.
The following modules are available for your system:
• Additional 2-Tray or 4-Tray Sheet Feeder Modules for a total of up to four SFMs
• The optional integrated Document Scanner Module (available only with the 4-Tray Sheet Feeder
Module)
• Up to two Insertion Modules (a 2-Tray or 4-Tray SFM)
• Multifunction Finisher (Professional or Pro Plus)
Xerox
®
Nuvera
®
6-2
User Guide and Training Aid (UGTA)
Xerox Nuvera EA/MX Production System
To Next Page
Loading...
Need help?
General