Receptacle NEMA Part Number
14-30 R (NASG)
Temperature and Humidity
Recommended 50 degrees F to 87 degrees F (10 C to 30.6 C)
15% relative humidity (minimum) to 85% relative humidity (maximum)
Altitude
Between 0 to 6000 ft (1828.8m) above sea level
Heat Emission
Approximately 2,018 BTU/hour (standby) and 11,600 BTU/hour (running)
Power Consumption
Approximately 0.658 kw maximum (standby) and 4.150 kw maximum (running). For information on
power consumption, see Power Saver Mode.
Sheet Feed Modules (SFM)
The Xerox Nuvera can be configured with up to four Sheet Feed Modules. They include a 4-Tray Feed
Module that can be installed with an optional Integrated Scanner, and an optional large format, high
capacity 2-Tray Feed Module.
The Xerox Nuvera can have any combination of the 4-Tray or 2-Tray Feed Modules installed up to a
total of four modules. If the 4-Tray Feed Module has a scanner, it should be installed closest to the Print
Engine.
The 4-Tray Feed Module, without a scanner, or the 2-Tray Feed Module can also be installed as a
post-fuser Insertion Module.
Note
The Xerox Nuvera 200/288/314 EA/MX Perfecting Production System 2-Tray SFM is capable of feeding
paper up to 19.33 inches (491 mm) in process length. This is not an option on the Xerox Nuvera EA
2-Tray SFM.
4-Tray SFM Capabilities and Capacities
Note
Some of the sizes shown below are the actual range of tray guide adjustment, rather than a nominal
paper type. For example, 8.5 x 11 inches is a paper type and 5.5 x 8.27 inches is the range of tray
adjustment.
• Paper Weight Range: 16 lb. bond - 120 lb. index (52 - 300 gsm)
• Paper Size Range: 5.5 x 8.27 inches - 12.2 x 18.5 inches
• Total Paper Input Capacity (based on 20 lb. bond/75 gsm): 5,800 sheets
21-35Xerox
®
Nuvera
®
User Guide and Training Aid (UGTA)
Machine Specifications
To Next Page
Loading...
Need help?
General