4. Refer to Table 5 for more information.
5. Image deletion defects might occur near the perforation, especially if the perforation is parallel to
the feed direction.
6. 2-sided copies or prints should not be selected when this stock is used.
7. Blank or preprinted covers are acceptable.
Plain Paper Performance Matrix
The Xerox Nuvera can process a wide array of stock types. Use the following topics to learn how each
stock type can be expected to perform in the system
Note
Systems installed with an MFF support 52 gsm - 220 gsm.
NoteTray 3,4Tray 1,2Throughput Material (8.5
x 11 inch or A4)
Paper Weight
Do Not UseDo Not UseLess than 52 gsm
Good/FairGood/FairBetween 16 - 20 lb. or 52
gsm
BestBestBetween 20 - 32 lb. or 75 -
120 gsm
GoodGoodBetween 32 - 110 lb. (in-
dex) or 120 - 216 gsm
Do Not UseDo Not UseGreater than 110 lb. (in-
dex) or 300 gsm;
Greater than 220 gsm for
systems with a MFF
Table Legend
• SEF: Short Edge Feed
• LEF: Long Edge Feed
• Best: Best system performance
• Good: Good system performance
• Fair: Significant performance degradation is likely, particularly paper handling.
• NR: Not Recommended. Exceeds system design. Unacceptable performance likely.
• **: Same performance as shown in 20 lb. Standard Paper Table for the corresponding paper sizes.
Paper and Tray Performance Matrix -- Loading Special Stock
The Xerox Nuvera can process a wide array of stock types. Use the following topics to learn how each
stock type can be expected to perform in the system
Xerox
®
Nuvera
®
10-6
User Guide and Training Aid (UGTA)
Expected Paper Handling
To Next Page
Loading...
Need help?
General