Xerox Nuvera User Manual

Multifunction Finisher (MFF) Interface
The Interface Module on the Multifunction Finisher Professional is part of the paper path that allows
the Xerox Nuvera to connect to the Multifunction Finisher. For the Multifunction Finisher Pro Plus, it is
also an Insertion Module that includes an Insertion Tray on top and a Hole Punch unit and waste bin
inside.
The MFF Pro Plus
To learn about clearing jams in this area, refer to Clearing paper jams.
MFF Professional
Multifunction Finisher (MFF)
The Multifunction Finisher adds a publishing capability to the Xerox Nuvera system. The MFF Professional
can fold documents, make booklets, staple bindings, collate and stack output. If your system has the
MFF Pro Plus model, Pro Plus provides the same functionality but adds post process insertion capability
(covers, preprinted sheets, tabs) and hole punch finishing.
The Interface Module on the Multifunction Finisher Professional is part of the paper path that allows
the Xerox Nuvera to connect to the Multifunction Finisher. For the Multifunction Finisher Pro Plus, it is
also an Insertion Module that includes an Insertion Tray on top and a Hole Punch unit and waste bin
inside.
6-9Xerox
®
Nuvera
®
User Guide and Training Aid (UGTA)
Xerox Nuvera EA/MX Production System

Xerox Nuvera Specifications

General

Brand	Xerox
Model	Nuvera
Category	Printer
Language	English