1 Document Glass (not shown): Scanning from the Document Glass and Cleaning the Document
Glass
2 Document Input Tray: Scanning from the Document Feeder, Clearing paper jams, Document Feeder
and Scanner specifications, and Cleaning the Document Feeder
3 Document Exit Tray
Sheet Enhancement Module (SEM)
The Sheet Enhancement Module on the Xerox Nuvera EA Production System and the Xerox Nuvera
200/288 EA/MX Perfecting Production System is a standard component on all configurations except
for those with a Multifunction Finisher.
Located to the right of the print engine, it is used to remove upcurl or downcurl in paper as it passes
through the module from the print engine. This feature is performed automatically by the system when
the Decurl Automatic Mode is selected. You can also manually adjust the amount of decurl to apply for
the job if more decurl is needed. Select the Manual or Automatic mode settings at the FreeFlow Print
Server from the Printer menu. For more information, see Managing Paper Curl.
6-11Xerox
®
Nuvera
®
User Guide and Training Aid (UGTA)
Xerox Nuvera EA/MX Production System
To Next Page
Loading...
Need help?
General