ComAp InteliLite 9 User Manual

InteliLite 9 Global Guide
179
Setpoint group Engine settings Related FW 1.1.0
Range [units] 0 .. 50 [%]
Default value 20% Alternative config NO
Step
1 % of Nominal RPM (page 151)
Comm object 14107 Related applications AMF, MRS
Config level Standard
Setpoint visibility Always
Description
This setpoint rise the upper limit of overspeed protection for the time which is defined in setpoint Overspeed
Overshot Period (page 179). In this time the upper limit of protection is Overspeed Sd (page 178) + Overspeed
Overshoot.
Overspeed Overshot
6 back to List of setpoints
Setpoint group Engine settings Related FW 1.1.0
Range [units] 0 .. 255 [s]
Default value 5 s Alternative config NO
Step 1 s
Comm object 14108 Related applications AMF, MRS
Config level Standard
Setpoint visibility
Conditioned by the setpoint Overspeed Overshot (page 179)
Description
Time for which is Overspeed Overshot (page 179) active. The timer starts in the same time when starter
starts.
Note: The setpoint is visible only, if Overspeed Overshot (page 179) is greater than 0.
Overspeed Overshot Period
6 back to List of setpoints
Setpoint group Engine settings Related FW 1.1.0
Range [units] the range is defined by analog sensor curve
Default value
the value is defined by
analog sensor curve
Alternative config NO
Step the step is defined by analog sensor curve
Comm object 12895 Related applications AMF, MRS
Config level Standard
Setpoint visibility Visible only if the logical analog input OIL PRESSURE (PAGE 355) is configured
Description
Warning or history threshold level for OIL PRESSURE (PAGE 355).
Oil Pressure Wrn
6 back to List of setpoints

ComAp InteliLite 9 Specifications

General

Brand	ComAp
Model	InteliLite 9
Category	Controller
Language	English