InteliLite 9 Global Guide
306
Related FW 1.1.0 Related applications AMF, MRS
Comm object 694
Description
This binary input is used for manual control of binary output FUEL PUMP (PAGE 327).
Note: This binary input is basically designed for ON and OFF switch (switch with arrestment in these
positions) because controller reacts to rising and falling edge of signal in this input.
IMPORTANT: When binary input FUEL PUMP ON/OFF (PAGE 306) is configured then binary
output FUEL PUMP (PAGE 327) is control by this binary input. Setpoints Fuel Pump On (page 164)
and Fuel Pump Off (page 163) are not evaluated!
Fuel Pump On/Off
6 back to Logical binary inputs alphabetically
To Next Page
Loading...
Need help?
General
