ComAp InteliLite 9 User Manual

InteliLite 9 Global Guide
149
Setpoint group Basic settings Related FW 1.1.0
Range [units] 80 .. 20 000 [V]
Default value 231 V Alternative config YES
Step 1 V
Comm object 8277 Related applications AMF, MRS
Config level Standard
Setpoint visibility
Conditioned by the setpoint Connection type (page 147).
Description
Nominal voltage (phase to neutral).
Note: To lock this setpoint against editing you also have to lock setpoint Nominal Voltage Ph-N 1 (page
240), Nominal Voltage Ph-N 2 (page 244) and Nominal Voltage Ph-N 3 (page 248).
Nominal Voltage Ph-N
6 back to List of setpoints
Setpoint group Basic settings Related FW 1.1.0
Range [units] 80 .. 40 000 [V]
Default value 400 V Alternative config YES
Step 1 V
Comm object 11657 Related applications AMF, MRS
Config level Standard
Setpoint visibility
Conditioned by the setpoint Connection type (page 147).
Description
Nominal system voltage (phase to phase).
Note: To lock this setpoint against editing you also have to lock setpoint Nominal Voltage Ph-Ph 1 (page
240), Nominal Voltage Ph-Ph 2 (page 244) and Nominal Voltage Ph-Ph 3 (page 248).
Nominal Voltage Ph-Ph
6 back to List of setpoints
Setpoint group Basic settings Related FW 1.1.0
Range [units] 0,1 .. 500,0 [V/V]
Default value 1,0 V/V Alternative config NO
Step 0,1 V/V
Comm object 9579 Related applications AMF, MRS
Config level Advanced
Setpoint visibility Always
Description
Generator voltage potential transformers ratio. If no PTs are used, adjust the setpoint to 1.
PT Ratio
6 back to List of setpoints

ComAp InteliLite 9 Specifications

General

Brand	ComAp
Model	InteliLite 9
Category	Controller
Language	English