ComAp InteliLite 9 User Manual

InteliLite 9 Global Guide
187
Subgroup: Maintenance
Setpoint group Engine settings Related FW 1.1.0
Range [units] -10 000 ... 9 999 [h] / Disabled
Default value 1 000 h Alternative config NO
Step 1 h
Comm object 11616 Related applications AMF, MRS
Config level Standard
Setpoint visibility Always
Description
Maintenance timer 1 counts down when engine is running. If reaches zero, an alarm appears, but the timer
still counting down into negative values. When the value 10000 is set, than the Maintenance function is
disabled and counter does not count. Counter value disappear from controllers statistics.
Maintenance Timer 1
6 back to List of setpoints
Setpoint group Engine settings Related FW 1.1.0
Range [units] -10 000 ... 9 999 [h] / Disabled
Default value 1 000 h Alternative config NO
Step 1 h
Comm object 11617 Related applications AMF, MRS
Config level Standard
Setpoint visibility Always
Description
Maintenance timer 2 counts down when engine is running. If reaches zero, an alarm appears, but the timer
still counting down into negative values. When the value 10000 is set, than the Maintenance function is
disabled and counter does not count. Counter value disappear from controllers statistics.
Maintenance Timer 2
6 back to List of setpoints

ComAp InteliLite 9 Specifications

General

Brand	ComAp
Model	InteliLite 9
Category	Controller
Language	English